Homeowner guide
Hard Water and Your Plumbing: What It Does and How to Fix It
Short answer
Hard water contains high levels of dissolved calcium and magnesium. The USGS rates water with 0 to 60 mg/L of hardness as soft, 61 to 120 as moderately hard, 121 to 180 as hard and over 180 as very hard. It is not a health risk, but its scale clogs fixtures and shortens water heater life.
A water softener is the most common whole-house fix, and a test tells you whether you need one.
What is hard water?
Water picks up minerals as it moves through soil and rock, especially limestone and chalk. The main hardness minerals are calcium and magnesium. The U.S. Geological Survey (USGS) reports that hard water is common across much of the United States, with some of the highest hardness in parts of the Southwest, the Midwest and the Plains states. Hardness is not regulated as a health contaminant.
How is water hardness measured?
Hardness is usually expressed as milligrams per liter (mg/L) of calcium carbonate, which is about the same as parts per million (ppm), or in grains per gallon (gpg). One grain per gallon equals about 17.1 mg/L.
| USGS classification | mg/L (ppm) as calcium carbonate | Approximate grains per gallon |
|---|---|---|
| Soft | 0 to 60 | 0 to 3.5 |
| Moderately hard | 61 to 120 | 3.5 to 7 |
| Hard | 121 to 180 | 7 to 10.5 |
| Very hard | More than 180 | More than 10.5 |
To find your hardness, check your water utility's annual Consumer Confidence Report or website, use a hardness test strip, or have a lab or plumber test it. Well owners should test, since hardness can vary widely from well to well.
What are the signs of hard water in a home?
- White, chalky crust on faucets, showerheads and drains
- Spots and film on dishes and glassware
- Soap scum in tubs and showers; soap and shampoo that lather poorly
- Reduced flow from showerheads and aerators clogged with scale
- Stiff laundry and dull colors
- Dry skin and hair after showering, which many people notice
- A water heater that rumbles or pops
How does hard water affect plumbing and appliances?
| Where | Effect |
|---|---|
| Tank water heaters | Minerals settle as sediment on the bottom, insulating the water from the burner, causing noise, lost efficiency and faster wear |
| Tankless water heaters | Scale builds in the heat exchanger, causing error codes and reduced output; manufacturers often require descaling in hard water |
| Faucets and valves | Scale wears cartridges and seals and causes drips |
| Showerheads and aerators | Openings clog, reducing flow |
| Toilets | Scale in rim jets weakens the flush; fill valves stick |
| Dishwashers and washers | Scale on heating elements and valves; more detergent needed |
| Pipes | Scale can build up over time, especially in hot water lines and older galvanized pipe |
The DOE notes that sediment and scale reduce water heater efficiency, which is why regular flushing and descaling are part of maintenance. See water heater lifespan.
What are the solutions for hard water?
- Ion exchange water softener: the standard whole-house solution. It replaces calcium and magnesium with sodium or potassium and regenerates with salt. See water softener and filtration.
- No-salt conditioners (such as template-assisted crystallization): change how minerals behave so they are less likely to form scale. They do not remove hardness and results vary; some communities that restrict salt-based softeners allow them.
- Point-of-use options: showerhead filters and RO systems for drinking water. RO also lowers dissolved minerals.
- Maintenance only: descaling fixtures with vinegar, flushing water heaters and descaling tankless units on schedule.
Is hard water safe to drink?
Yes. Hard water is not considered a health risk, and the World Health Organization notes calcium and magnesium are dietary minerals. Hardness is mostly a nuisance and a maintenance issue. Softened water contains added sodium; people on sodium-restricted diets should ask their doctor and may choose to keep a drinking water tap unsoftened.
How do I clean hard water scale from fixtures?
- Soak showerheads and aerators in white vinegar for an hour or more, then scrub with an old toothbrush.
- Wrap a vinegar-soaked cloth around faucet bases and spouts.
- Use a pumice stone made for toilets, carefully, on rings in the bowl.
- Run dishwasher and washing machine cleaning cycles as the manufacturer recommends.
- Flush your tank water heater about once a year, or as the maker directs.
Never mix vinegar or other acids with bleach.
Who should install a water softener?
A softener connects to the main water line and needs a bypass valve, a drain with an air gap and often an electrical outlet. Local codes may require a permit. A plumber can size the unit to your hardness and water use, set the regeneration program and keep outdoor hose bibs on unsoftened water if you prefer. See fixtures and water heaters for related work.
Where is hard water most common in the United States?
The USGS publishes national maps of water hardness. In general, water tends to be harder in areas with limestone and other carbonate rock and in drier regions, including much of the Southwest, the central Plains and parts of the Midwest. Water is often softer in the Pacific Northwest, New England and parts of the Southeast. Local conditions vary, and two neighboring towns can have very different water, so check your own utility's report or test your well.
How to read your water quality report for hardness
- Every community water system must send customers an annual Consumer Confidence Report, which the EPA requires.
- Hardness is not a regulated health contaminant, so it may appear in a separate table for secondary or unregulated items, or not at all. Look for "hardness," "total hardness," "calcium" or "magnesium."
- If hardness is listed in mg/L or ppm, compare it with the USGS scale. If it is in grains per gallon, multiply by about 17.1 to get mg/L.
- If your water comes from several sources, hardness can change by season.
Should outdoor water be softened?
Many plumbers set up softeners so outdoor hose bibs and irrigation stay on hard water. Watering lawns and gardens does not need soft water, and the added sodium in softened water is not ideal for plants. Bypassing outdoor lines also saves salt and extends the life of the softener resin.
Practical tips for living with hard water
- Use a rinse aid in the dishwasher to reduce spotting.
- Choose detergents formulated for hard water and follow dosing for your hardness level.
- Wipe shower glass and fixtures dry after use to slow scale buildup.
- Clean aerators and showerheads every few months.
- Set the water heater to about 120 degrees F, as the DOE suggests; scale forms faster at higher temperatures.
- Flush the water heater on the maker's schedule.
Frequently asked questions
What level of hardness needs a water softener?
There is no single rule. Many homeowners consider softening once water is in the USGS hard range (over 120 mg/L), especially with scale problems or a tankless water heater.
Does hard water damage pipes?
Scale can build up over many years, most noticeably in hot water lines and fixtures. Fixtures and water heaters usually show damage first.
Can hard water cause low water pressure?
Yes, at clogged aerators and showerheads, and in older galvanized pipe where scale and rust build up.
Do no-salt water conditioners work?
Some reduce scale formation, but they do not remove hardness minerals. Look for independent certification and realistic claims.
Does hard water affect a tankless water heater?
Yes. Scale builds up in the heat exchanger, which is why manufacturers call for periodic descaling and may recommend treatment in hard water.
Related services
Need a plumber?
Drains, leaks, water heaters, sewer lines and emergencies, day or night.
Call (855) 902-0055