Plumbing services
Water Softener and Water Filtration Installation and Repair
A water softener removes the hardness minerals calcium and magnesium, which cause scale on fixtures and inside water heaters. A whole-house filter treats all water entering the home for things like sediment and chlorine taste. A reverse osmosis (RO) system, usually under the kitchen sink, treats drinking water for many dissolved contaminants.
Many homes use more than one of these systems.
The right system depends on what is actually in your water. Start with a test, not a sales pitch.
Signs you need water softener and filtration
- White crusty scale on faucets, showerheads and glass doors
- Spots on dishes and glassware after washing
- Soap and shampoo that do not lather well
- A water heater that pops, rumbles or has lost capacity
- Chlorine taste or smell in tap water
- Rotten egg smell, rust stains or cloudy water
- Sediment or sand in aerators and toilet tanks
- A softener that stopped regenerating or uses no salt
- Well water that has not been tested recently
Do I need a water softener, a filter or both?
They solve different problems:
| System | What it does | What it does not do |
|---|---|---|
| Water softener (ion exchange) | Removes calcium and magnesium hardness; can also reduce small amounts of iron | Does not remove most chemicals, bacteria or lead; adds a small amount of sodium or potassium |
| Sediment filter | Traps sand, rust and silt | Does not remove dissolved minerals or chemicals |
| Whole-house carbon filter | Reduces chlorine taste and odor and some organic chemicals; some models certified for chloramine | Does not soften water |
| Reverse osmosis (point of use) | Reduces a wide range of dissolved solids; many models are certified for lead, arsenic, nitrate or PFAS reduction | Usually treats only one faucet; slower flow; produces wastewater |
| UV disinfection | Inactivates bacteria and viruses, often used on wells | Does not remove chemicals or minerals |
| Iron and sulfur filters | Remove iron, manganese and hydrogen sulfide (rotten egg smell) | Not a substitute for softening |
A common setup for hard city water is a sediment filter, a softener, and an RO system at the kitchen sink for drinking water.
How do I know if I have hard water?
The U.S. Geological Survey (USGS) classifies water hardness by the amount of calcium carbonate it contains:
| USGS classification | Milligrams per liter (mg/L) |
|---|---|
| Soft | 0 to 60 |
| Moderately hard | 61 to 120 |
| Hard | 121 to 180 |
| Very hard | More than 180 |
Softener makers usually express hardness in grains per gallon. One grain per gallon equals about 17.1 mg/L. If you are on city water, your utility's annual Consumer Confidence Report often lists hardness. Test strips and lab tests also work. Our guide on hard water and plumbing covers the effects in detail.
How does a water softener work?
Most home softeners use ion exchange. Water flows through a tank of resin beads that hold sodium (or potassium) ions. The beads grab calcium and magnesium and release sodium in their place. When the beads are full, the softener regenerates: it flushes the resin with salty brine from the salt tank and sends the rinse water to a drain.
Key points for homeowners:
- Sizing: based on hardness and household water use. An undersized unit regenerates too often; an oversized one can waste salt and water.
- Demand-initiated regeneration: newer units regenerate based on actual water use, not a timer, which saves salt and water.
- Drain and air gap: the discharge line needs a proper air gap so wastewater cannot siphon back.
- Bypass valve: lets you send unsoftened water to the house during service.
- Outdoor lines: many installers keep hose bibs on hard water so softened water is not used for irrigation.
- Local rules: some communities restrict or ban salt-discharge softeners because of salt in wastewater. No-salt conditioners are an alternative, though they work differently and do not remove hardness minerals.
What does a whole-house water filter remove?
A whole-house (point-of-entry) filter is installed on the main line, so it treats water for every faucet, shower and appliance. Most combine a sediment stage with activated carbon. They are a good fit for:
- Chlorine or chloramine taste and odor from city water
- Sand and sediment, especially from wells
- Protecting a softener, water heater and fixtures from debris
Choose filters certified by an accredited body such as NSF International, Water Quality Association or IAPMO to the NSF/ANSI standard for the contaminant you care about. NSF/ANSI 42 covers aesthetic effects such as chlorine taste. NSF/ANSI 53 covers health-related contaminants such as lead. NSF/ANSI 58 covers reverse osmosis systems. NSF/ANSI 44 covers softeners. Read the claims on the specific model, not just the brand.
Is reverse osmosis worth it for drinking water?
Reverse osmosis pushes water through a very fine membrane, usually after sediment and carbon prefilters. It is one of the broadest home treatment options for drinking water. Many models are certified to reduce lead, arsenic, fluoride, nitrate, and certain PFAS chemicals. Check the certification listing for the model you are considering.
Things to know:
- RO is usually installed at one faucet, with a small storage tank under the sink. It can also feed the refrigerator ice maker.
- It sends some water to the drain as part of normal operation.
- Filters and the membrane need replacement on schedule, or performance drops.
- If you are concerned about lead, also read our guide on lead service lines.
What about well water?
Private wells are not regulated by the EPA. The CDC recommends that well owners test their water every year for total coliform bacteria, nitrates, total dissolved solids and pH, and more often if something changes. Well water commonly needs sediment filtration, iron or sulfur treatment, softening and sometimes UV disinfection. Test first, then choose treatment based on the results. Your local health department can often recommend certified labs.
What does installation and service include?
- Water test to confirm hardness, iron, chlorine and other issues.
- Location planning near the main line, with access to a drain and, for most softeners, an electrical outlet.
- Plumbing connections, including a bypass valve, shutoffs and a proper drain air gap.
- Setup: programming the softener for your hardness and household size.
- Repair and service: resin replacement, control valve repair, salt bridges, clogged injectors, filter and membrane changes.
Plumbing codes and permit requirements vary by city. A local plumber knows what applies where you live.
How does soft water help my water heater and fixtures?
Scale builds up in tank water heaters as a layer of sediment and in tankless heat exchangers, where it reduces efficiency and can shorten equipment life. Manufacturers of tankless heaters often require periodic descaling in hard water areas and may reference hardness limits in their warranty terms. Softening also reduces spotting on glass and fixtures and helps faucets and valves last longer. See water heaters and tankless water heaters.
How it works
- Call (855) 902-0055Tell us what is going on and your address. We answer 24/7.
- A local plumber comes outA plumber serving your area arrives, finds the problem and explains it.
- Fixed rightYou get the price before work starts, then the job is done and cleaned up.
Water Softener and Filtration: common questions
Does a water softener make water unsafe to drink?
Softened water contains added sodium in proportion to how hard the water was. People on low-sodium diets should ask their doctor. Many households keep a cold drinking-water tap unsoftened or use an RO system at the kitchen sink.
How often do I add salt to a water softener?
Check the brine tank monthly and keep it at least partly full. Use depends on hardness, water use and the unit's efficiency.
Does a water softener remove lead or PFAS?
No. A softener is not designed for those. Use a filter certified for the contaminant, such as NSF/ANSI 53 for lead, or an RO system certified for the specific chemical.
How often should filters be changed?
Follow the maker's schedule. Sediment and carbon cartridges are often changed every few months to a year; RO membranes last longer. A drop in pressure or a return of taste or odor is a sign a filter is due.
Can a plumber repair my existing softener?
Often, yes. Common fixes include control valve repairs, injector cleaning, resin replacement and clearing salt bridges in the brine tank.
Related
Water Softener and Filtration near you
- Plumber in New York, NY
- Plumber in Los Angeles, CA
- Plumber in Chicago, IL
- Plumber in Brooklyn, NY
- Plumber in Houston, TX
- Plumber in Phoenix, AZ
- Plumber in Philadelphia, PA
- Plumber in San Antonio, TX
- Plumber in Bronx, NY
- Plumber in San Diego, CA
- Plumber in Dallas, TX
- Plumber in San Jose, CA
- Plumber in Austin, TX
- Plumber in Jacksonville, FL
- Plumber in Fort Worth, TX
- Plumber in Columbus, OH
- Plumber in Saint Louis, MO
- Plumber in Charlotte, NC
- Plumber in Indianapolis, IN
- Plumber in San Francisco, CA
- Plumber in Saint Paul, MN
- Plumber in Seattle, WA
- Plumber in Denver, CO
- Plumber in Oklahoma City, OK
Need a plumber?
Drains, leaks, water heaters, sewer lines and emergencies, day or night.
Call (855) 902-0055